|
Click on picture to enlarge.
The
ERB Heavy Duty Cartridge Type Ignition Electrode was specifically
designed in accordance with Underwriters' specifications, to meet the
ignition requirements for gas burners used in bakery band ovens and other
multiple burner type bake ovens.
The ERB heavy duty electrode has the following
features; The insulators are made of the highest grade steatite having
a dielectric strength of 240 volts per mil. They will withstand a current
of 15,000 volts in a temperature of 1,700°F., without break-down.
All insulators are heavily glazed to prevent moisture absorption. The
electrode spacer is made of stainless steel tubing. The entire assembly
is held together by means of a stainless steel rod and is completely non-corrosive,
assuring long and trouble-free operation. The electrode may be made any
length desired and can, therefore, be adapted to any oven installation,
without danger of short circuit, regardless of oven wall thickness or
burner flame position.
The spark end of the electrode is arranged with a stainless
steel connector which holds the spark tip in place and also allows for
lateral adjustment of the tip. The tip can be readily and inexpensively
replaced without replacing any other part of the electrode. The oven plate
end of the electrode is equipped with a Rajah stud. Rajah snap type connectors
can be supplied for convenient connection between the high tension source
and the electrode. ERB oven plates and electrode brackets
are available for holding the electrodes securely in position and permitting
the electrode to be withdrawn without disturbing the oven plates, burners,
or piping. The oven plate is designed to allow full inspection of the
burner flame and point of ignition. All parts are interchangeable and
may be replaced when necessary.
In addition to Heavy Duty Electrodes, ERB
has a variety of Ignition Cables, Special Tips, Mounting Brackets and
Ignition Transformers and Supplies.
|
Electrodes/
Ignitors / Sensor
